Parts and accessories listed for the Brother HS3000. Check each product's compatibility before ordering.
120V Foot Control Socket Assembly with Nut for Brother CS6000i, HC1850 & ES2000, #XC9830021
Regular price $35.99Unit priceVery low stock (2 units)1/4 Inch Low Shank Binder Foot for Brother, Kenmore & Singer, #941490000
Regular price $25.99Unit priceRotary Hook for Baby Lock, Brother CS6000i, LB6800, NQ900, NV950D, SE400, #XC4141121
Regular price $47.99Unit priceClass 15 Clear Plastic Bobbins (SA156) for Brother & Baby Lock Sewing Machines, #X52800150
Pack Size: 10 Bobbins, 25 Bobbins, 50 Bobbins, 100 Bobbins
Regular priceFrom $19.99Unit price- Regular priceFrom $18.99Unit price
Internal Motor for Brother CS-6000i, CS-4000, ES2000, XR9500PRW, #XC9829022
Regular price $58.99Unit priceSequin & Trim Foot, Snap-On, for Baby Lock, Brother & Singer, #P60104
Regular price $31.99Unit priceNeedle Bar with Clamp & Screw for Brother CS6000i, HC1850 & SQ9185, #XE3825001
Regular price $29.99Unit priceIn stock (100 units)
Parts guide for the Brother HS3000
- Presser feet in the box
- Seven: buttonhole A, overcasting G, monogramming N, zipper I, zigzag J (on the machine), blind stitch R and button fitting M
- Bobbins
- Four included, SA156 in the U.S.A./Canada (XA5539-151 elsewhere); 11.5 mm bobbin
- Needles
- Needle set XC8834-021 (one each 75/11, 90/14 and 100/16), a gold ball point 90/14 XD0360-021 and twin needle 131096-121
- Foot controller
- Model T in the U.S.A.; part XC8816-021 (XD0501-021 in the EU area)
- Sewing light
- LED light unit; if damaged it must be replaced by an authorized dealer
From the maker's manual, checked Nov 6, 2026
Maker manuals for this machine
What comes with the machine
- Buttonhole foot "A" (XC2691-033)
- Overcasting foot "G" (XC3098-031)
- Monogramming foot "N" (XD0810-031)
- Zipper foot "I" (X59370-021)
- Zigzag foot "J" (XC3021-031), on machine
- Blind stitch foot "R" (XC4051-031)
- Button fitting foot "M" (XE2137-001)
- Seam ripper (X54243-051)
- Bobbin x 4 (U.S.A./Canada SA156, others XA5539-151)
- Needle set (XC8834-021)
- Twin needle (131096-121)
- Ball point needle, gold colored (XD0360-021)
- Cleaning brush (X59476-021)
- Screwdriver (XC8349-021)
- Extra spool pin (130920-021)
- Foot controller (XC8816-021; XD0501-021 EU area)
Optional accessories Brother lists for it
- Walking foot (U.S.A./Canada; F033N elsewhere) SA140
- Quilting foot (U.S.A./Canada; F005N elsewhere) SA129
- 1/4 inch quilting foot (U.S.A./Canada; F001N elsewhere) SA125
- Quilting guide (U.S.A./Canada; F016N elsewhere) SA132
- Eyelet punch XZ5051-001
- Screw of the presser foot holder (through an authorized dealer) 132730-122
Brother HS3000 parts questions
Is presser foot holder screw 132730-122 for the HS-3000 sold through dealers?
Yes, through an authorized dealer: part code 132730-122 is the screw that holds the presser foot holder.
What is gold ball point needle XD0360-021 for on the HS-3000?
A 90/14 ball point needle, XD0360-021, recommended for stretch fabrics and fabrics where skipped stitches easily occur.
How do buttonhole foot A XC2691-033 and the buttonhole lever work together on the HS-3000?
Attach buttonhole foot A (XC2691-033), then pull the buttonhole lever down as far as it goes so it sits behind the foot, and start sewing.
What needle suits easily frayed fabric or top-stitching on the HS-3000?
The chart gives 65/9 to 90/14 for easily frayed fabrics and 90/14 to 100/16 for top-stitching with synthetic or silk thread.