Free US shipping over $49 · Ships in 1–2 business days

BERNINA B570 QE

(25 products)

Parts and accessories listed for the BERNINA B570 QE. Each product names the machines it fits, so check your model on the product page before ordering.

Parts and accessories listed for the BERNINA B570 QE. Check each product's compatibility before ordering.


Parts guide for the BERNINA B570 QE

Presser feet
Seven: No. 1 reverse pattern, No. 3A automatic buttonhole with slide, No. 4 zipper, No. 5 blindstitch, No. 20 open embroidery, No. 37 patchwork and No. 42 BSR
Bobbins
Five supplied, one already fitted in the bobbin case
Needles
System 130/705 H; embroidery calls for 130/705 H-SUK in sizes 70 to 90
Foot control
In the USA and Canada, use only foot controller type LV-1
Stitch plate
Flips up when pressed at the right back corner and clicks back in; a straight/CutWork plate is optional
BSR foot
No. 42 plugs into the machine and holds straight-stitch length up to 4 mm in free-motion quilting

From the maker's manual, checked Nov 6, 2026

Maker manuals for this machine

What comes with the machine
  • Reverse pattern foot No. 1
  • Automatic buttonhole foot with slide No. 3A
  • Zipper foot No. 4
  • Blindstitch foot No. 5
  • Open embroidery foot No. 20
  • Patchwork foot No. 37
  • BSR foot No. 42
  • Bobbins (5, one in the bobbin case)
  • Selection of needles
  • Seam guide, right
  • Height compensation tool
  • Seam ripper
  • Screwdriver, red
  • Angular Torx button
  • Lint brush
  • Lubricator
  • Foam pads (2)
  • Spool discs (3)
  • Carrier bag
  • Accessories box
  • Seam guide
  • Foot control
  • Power cable
  • Slide-on table
  • Presser foot lifter
Optional accessories BERNINA lists for it
  • Buttonhole foot No. 3
  • Jeans foot No. 8
  • Darning foot No. 9
  • Edge stitch foot No. 10
  • Button sew-on foot No. 18
  • Pintuck foot, 3 grooves No. 30
  • Pintuck foot, 5 grooves No. 31
  • Pintuck foot, 7 grooves No. 32
  • Pintuck foot, 9 grooves No. 33
  • Straight/CutWork stitch plate
  • Darning hoop
  • Buttonhole cutter

BERNINA B570 QE parts questions

Which quilting feet does the B 570 QE have that the B 555 lacks?

The No. 37 patchwork foot and the No. 42 BSR stitch-regulator foot. Both are left out of the B 555 box.

What stitch length can the BSR foot hold on the B 570 QE?

With foot No. 42 and straight stitch No. 1, the regulated length can be set up to 4 mm; the standard setting is 2 mm, and 1 to 1.5 mm suits small shapes and stippling.

Can any BERNINA pedal run a B 570 QE sold in the USA or Canada?

No. There, the B 570 QE should be run only with foot controller type LV-1.

How is the stitch plate taken off the B 570 QE for cleaning?

Lower the feed dog, switch off, remove the foot and needle, then press the plate down at its right back corner until it flips up. Set it over the opening and press until it clicks to refit.