Free US shipping over $49 · Ships in 1–2 business days

SINGER 2273 Esteem II

(5 products)

Parts and accessories listed for the SINGER 2273 Esteem II. Each product names the machines it fits, so check your model on the product page before ordering.

Also listed as Esteem II 2273.

Also sold as: Esteem II 2273

Parts and accessories listed for the SINGER 2273 Esteem II. Check each product's compatibility before ordering.


Parts guide for the SINGER 2273 Esteem II

Presser feet in the box
All purpose, zipper, buttonhole and button sewing feet; low shank, snap-on style
Bobbins
SINGER Class 15 transparent bobbins, three in the box
Darning plate
Included; snaps into holes in the needle plate to cover the feed teeth for button sewing
Needles
Pack of needles in the box; the book advises SINGER needles and a change about every 16 hours of sewing
Foot control
KD-1902 or FC-1902 (110-120V); KD-2902, FC-2902A, FC-2902C or FC-2902D (220-240V); Wakaho 4C-316B, 4C-316C, 4C-326C, 4C-326G or 4C-336G by voltage
Light
LED lamp, expected to last the life of the machine; replaced only by a service agent

From the maker's manual, checked Nov 6, 2026

What comes with the machine
  • All purpose foot
  • Zipper foot
  • Buttonhole foot
  • Button sewing foot
  • Seam ripper/brush
  • Edge/quilting guide
  • Pack of needles
  • Spool holder
  • Bobbins (3)
  • L-screwdriver
  • Darning plate

SINGER 2273 Esteem II parts questions

Which bobbin style is the 2273 built for, and may it be swapped?

The book says not to substitute. Use SINGER Class 15 transparent bobbins, the same style as the three supplied.

What shank type should optional feet have for the 2273?

Low shank, snap-on. Some optional feet need the shank taken off by removing the presser foot screw.

Which plate covers the 2273 feed teeth for button sewing?

The darning plate from the box. Line up the prongs on its underside with the holes in the needle plate and push down until it snaps in. It covers the feed teeth, so take it off afterwards.

Is the 2273 light a replaceable bulb?

It is an LED, expected to last the life of the machine. If it is damaged the book says the maker or a service agent should replace it.