Free US shipping over $49 · Ships in 1–2 business days

Janome Memory Craft 4800 (MC4800)

(9 products)

Parts and accessories listed for the Janome Memory Craft 4800. Each product names the machines it fits, so check your model on the product page before ordering.

Also listed as MC4800.

Also sold as: MC4800, Memory Craft 4800

Parts and accessories listed for the Janome Memory Craft 4800 (MC4800). Check each product's compatibility before ordering.


Parts guide for the Janome Memory Craft 4800 (MC4800)

Presser feet
Lettered feet A, C, D, E, F, G, H, M, P and R, with the A zigzag foot fitted on the machine
Foot control
Model 21371
Needles
Blue tip needle for stretch, very fine and synthetic fabric; sizes 9 to 16 by fabric weight
Twin needle
Twin needle key on the panel; the needle threader cannot be used with a twin needle
Bobbin
Bobbin sits in a bobbin holder under a hook cover plate with a release button; the holder lifts out for cleaning
Light bulb
15 W bulb behind the front cover plate, held in a black rubber socket
Needle plate
Held by one screw and two guide pins

From the maker's manual, checked Nov 6, 2026

Maker manuals for this machine

What comes with the machine
  • A zigzag foot (fitted on the machine)
  • C overedge foot
  • D hemmer foot
  • E zipper foot
  • F satin stitch foot
  • G blind hem foot
  • H cording foot
  • M foot
  • P basting foot
  • R automatic buttonhole foot
  • L quilting bar
  • Needle set
  • Screwdriver
  • Lint brush
  • Bobbins
  • Seam ripper
  • Large spool holder (fitted on the machine)
  • Small spool holder
  • Additional spool pin
  • Felt
  • Spool stand base
  • Foot control
  • Power cord
  • Carrying case

Janome Memory Craft 4800 (MC4800) parts questions

Does pedal number 21371 belong to the Memory Craft 4800?

Yes. Foot control Model 21371 is the one specified for use with the MC4800 sewing machine.

How many lettered feet does a Memory Craft 4800 owner get, and which letters?

A (already fitted), C, D, E, F, G, H, M, P and R, plus a separate L quilting bar.

How is a twin needle threaded and fed on the Memory Craft 4800?

Thread it by hand, since the needle threader cannot be used with a twin needle. Put the second spool on the additional spool pin with the felt, thread each needle from front to back, and press the twin needle key before sewing.

How is the 15 W lamp reached on the Memory Craft 4800?

Open the front cover plate, pull the black rubber socket out of its holder and draw the bulb out. Line the bulb pins up with the socket holes to fit a new one.