Parts and accessories listed for the Janome DC3050. Check each product's compatibility before ordering.
1/4 Inch Seam Foot (Quilting Foot O) with Guide for Janome MC6500 & MC9000, #200008107
Regular price $24.99Unit pricePush-In LED Light Bulb, 12V Cool White, for Husqvarna Viking, BERNINA & Brother, #4117810-LED
Regular priceFrom $27.99Unit priceClass 15 Clear Plastic Bobbins (SA156) for Janome, Kenmore & Elna Drop-In Machines, #102261103
Pack Size: 10 Bobbins, 25 Bobbins, 50 Bobbins, 100 Bobbins
Regular priceFrom $19.99Unit price- Regular price $27.99Unit price
Zigzag Needle Plate for Janome DC3018, HF3000, Elna 6003 & Kenmore 385.19157100, #756604107
Regular price $34.99Unit priceEdge Joining Foot 7mm, Low-Shank Snap-On, for Singer, Janome, Brother & Baby Lock, #P60709
Regular price $27.99Unit priceWalking Foot with Quilt Guide for PFAFF Hobby 1122, 1132 & 1142 Low Shank, #214874013
Regular price $34.99Unit priceFeed Dog for Kenmore, Janome DC2010, HF3000, MC4800QC & Elna eXperience 520, #827041000
Regular price $33.99Unit priceEven Feed Walking Foot with Quilting Guide for Janome HD3000, DC2013 & MC6300P, #200311003
Regular price $57.99Unit priceConvertible Even Feed Foot Set, Low Shank, Janome HD3000 & Elna, #214517004
Regular price $87.99Unit priceIn stock (99 units)- Regular price $31.99Unit price
Parts guide for the Janome DC3050
- Presser feet
- Zigzag foot A on the machine, with zipper foot E, satin stitch foot F and automatic buttonhole foot R in the table
- Overedge foot
- Overedge foot C is an optional item; set the zigzag width at 5.0 or wider when using it
- Blind hem foot
- Blind hem foot G is an optional item
- Foot controller
- Model 21371
- Light bulb
- 12 V, 5 W
From the maker's manual, checked Nov 6, 2026
Maker manuals for this machine
What comes with the machine
- Zipper foot E
- Satin stitch foot F
- Automatic buttonhole foot R
- Screwdriver
- Bobbins
- Set of needles
- Seam ripper
- Additional spool pin
- Spool holder (large)
- Spool holder (small)
- Spool stand
- Felt
Optional accessories Janome lists for it
- Overedge foot C (optional item)
- Blind hem foot G (optional item)
Janome DC3050 parts questions
Is an overedge foot included with the Janome DC3050?
No. Overedge foot C is an optional item, and the book says to set the zigzag width at 5.0 or wider with it so the needle clears the wires on the foot.
Does the DC3050 come with a blind hem foot?
No. Blind hem foot G is listed as an optional item; zipper E, satin stitch F and automatic buttonhole R are the feet in the box.
What foot controller and bulb does the DC3050 use?
Foot controller model 21371, and a replacement bulb of the same type rated 12V, 5W behind the cap and setscrew.