Free US shipping over $49 · Ships in 1–2 business days

Janome 4618LE

(9 products)

Parts and accessories listed for the Janome 4618LE. Each product names the machines it fits, so check your model on the product page before ordering.

Parts and accessories listed for the Janome 4618LE. Check each product's compatibility before ordering.


Parts guide for the Janome 4618LE

Presser feet
Lettered snap-on feet A, B, C, D, E, G and R, each with its own pocket in the foot storage compartment
Needles
Blue tipped needle recommended for stretch, very fine and synthetic fabrics; sizes 9 to 16 by fabric weight
Bobbin
Bobbin holder under a hook cover plate; bobbin sits with the thread running counter-clockwise
Foot control
Model YC-482R or TJC-150
Sewing lamp
Bulb behind the face plate, 15 watts maximum
Zigzag width
Up to 6.5 mm

From the maker's manual, checked Nov 6, 2026

Maker manuals for this machine

What comes with the machine
  • A. Zigzag foot
  • B. Transparent buttonhole foot
  • C. Overedge foot
  • D. Hemmer foot
  • E. Zipper foot
  • G. Blind stitch hem foot
  • R. Automatic buttonhole foot
  • L. Quilter
  • Needle case
  • Extension table (accessory storage box)

Janome 4618LE parts questions

If my 4618LE pedal is a YC-482R and a friend's is a TJC-150, are both correct?

Yes. The 4618LE book lists foot controller YC-482R and TJC-150 as the two pedals for this machine.

Seven feet have lettered pockets in the 4618LE storage compartment: which letters?

Letters A, B, C, D, E, G and R (zigzag through automatic buttonhole), and the R foot may be kept in the extension table.

Is a 25 watt lamp safe behind the 4618LE face plate?

No. The book sets 15 watts as the highest lamp rating for this model.

Does the 4618LE reach a 6.5 mm zigzag, and where is it set?

Yes, 6.5 mm (about 1/4 inch) is the widest setting on its zigzag width control.