Free US shipping over $49 · Ships in 1–2 business days

Janome 415

(7 products)

Parts and accessories listed for the Janome 415. Each product names the machines it fits, so check your model on the product page before ordering.

Parts and accessories listed for the Janome 415. Check each product's compatibility before ordering.


Parts guide for the Janome 415

Presser feet
Feet drop off when the lever at the back of the foot holder is pressed; zipper, buttonhole and hem feet in the box
Needles
Flat side away from you; sizes 9 to 16 by fabric weight, with a blue tip needle for stretch, very light and synthetic fabric
Needle threader
Built in; works with needles No. 11 to 16 or a Janome blue tip needle and thread 50 to 100
Bobbin case
Removable bobbin case lifted out by its latch behind the hook cover
Stretch stitches
Stitch length dial set to S.S for the stretch patterns
Hem guide
Hem guide included; it fits between the foot holder screw and shank for blind hems

From the maker's manual, checked Nov 6, 2026

Maker manuals for this machine

What comes with the machine
  • Zipper foot
  • Buttonhole foot
  • Hem foot
  • Bobbin
  • Needle set
  • Seam ripper
  • Screwdriver
  • Oil
  • Hem guide

Janome 415 parts questions

What thread weights does the Janome 415 needle threader handle?

Thread from 50 to 100, on needles No. 11 to 16 or a Janome blue tip needle.

What does S.S on the Janome 415 stitch length dial mean?

It is the setting for the stretch patterns. If a stretch pattern looks uneven, slide the control toward minus to close it up or plus to open it.

Where does the 415 hem guide fit for a blind hem?

Between the foot holder screw and its shank. Loosen the screw, slide the guide in, tighten it and fold a 0.4 to 0.7 cm edge.

How much extra lift does the 415 presser foot lever give?

About 0.6 cm above the normal up position, for changing feet or slipping thick fabric under the foot.