Parts and accessories listed for the Brother NX450. Check each product's compatibility before ordering.
1/8 Inch Welting Piping Foot, Low Shank, for Singer 221 Featherweight & 201, #40986X618
Regular priceFrom $22.99Unit priceClass 15 Clear Plastic Bobbins (SA156) for Janome, Kenmore & Elna Drop-In Machines, #102261103
Pack Size: 10 Bobbins, 25 Bobbins, 50 Bobbins, 100 Bobbins
Regular priceFrom $19.99Unit priceClass 15 Clear Plastic Bobbins (SA156) for Brother & Baby Lock Sewing Machines, #X52800150
Pack Size: 10 Bobbins, 25 Bobbins, 50 Bobbins, 100 Bobbins
Regular priceFrom $19.99Unit priceEdge Joining Foot 7mm, Low-Shank Snap-On, for Singer, Janome, Brother & Baby Lock, #P60709
Regular price $27.99Unit price1/4 Inch Low Shank Binder Foot for Brother, Kenmore & Singer, #941490000
Regular price $25.99Unit priceRotary Hook for Baby Lock, Brother CS6000i, LB6800, NQ900, NV950D, SE400, #XC4141121
Regular price $47.99Unit priceFoot Control Pedal for Brother CS8060, NX450, PC8500, SE270D & Baby Lock BLDC, #XC6651121
Regular price $49.95Unit price- Regular priceFrom $18.99Unit price
1/4" Quilting Foot with Guide Bar, Snap-On Metal for Brother & Baby Lock, #P60603
Regular price $26.99Unit priceSequin & Trim Foot, Snap-On, for Baby Lock, Brother & Singer, #P60104
Regular price $31.99Unit price
Parts guide for the Brother NX450
- Presser feet
- Thirteen in the box: A, G, N, I, J (on the machine), R, M, walking SA140, quilting SA129, stitch guide P SA160, adjustable zipper/piping SA161, non stick SA114 and open toe SA186 (Americas codes)
- Bobbins
- Four, SA156 in the Americas (SFB XA5539-151 elsewhere)
- Needles
- Needle set X58358-021 (two 75/11, two 90/14, two gold ball point 90/14) and twin needle X59296-121; the threader takes 75/11 through 100/16 and is not for wing or twin needles
- Foot controller
- Model N5V in the U.S.A.; XC6651-321 (XD0496-221 in the EU area)
- Knee lifter
- XA6941-052, included
- Light
- LED light unit, replaced by an authorized dealer if damaged
From the maker's manual, checked Nov 6, 2026
Maker manuals for this machine
What comes with the machine
- Buttonhole foot "A" (XC2691-023)
- Overcasting foot "G" (XE6305-101)
- Monogramming foot "N" (XD0810-031)
- Zipper foot "I" (X59370-021)
- Zigzag foot "J" (XC3021-031), on the machine
- Blind stitch foot "R" (XE2650-001)
- Button fitting foot "M" (XE2643-001)
- Walking foot (SA140; F033N XC2214-052)
- Quilting foot (SA129; F005N XC1948-052)
- Stitch guide foot "P" (SA160; F035N XC1969-052)
- Adjustable zipper/piping foot (SA161; F036N XC1970-052)
- Non stick foot (SA114; F007N XC1949-052)
- Open toe foot (SA186; F060 XE1094-101)
- Seam ripper (XZ5082-001)
- Bobbins x 4 (SA156; SFB XA5539-151)
- Needle set (X58358-021)
- Twin needle (X59296-121)
- Cleaning brush (X59476-021)
- Eyelet punch (XZ5051-001)
- Screwdrivers, large (XC8349-021) and small (X55468-021)
- Spool caps: large (130012-024), medium x 2 (XE1372-001), small (130013-124)
- Extra spool pin (XC4654-151)
- Spool net (XA5523-020)
- Foot controller (XC6651-321; XD0496-221 EU area)
- Grid sheet set (XC4549-020)
- Knee lifter (XA6941-052)
- Hard case (XC9701-052)
- Accessory bag (XC4487-021)
- Disc-shaped screwdriver (XC1074-051)
- Stitch pattern plate (from a dealer or authorized service center)
Optional accessories Brother lists for it
- Side cutter SA177 (F054 XC3879-152)
- Quilting guide SA132 (F016N XC2215-052)
- Wide table SA551 (WT5 XC9567-222)
- 1/4 inch quilting foot SA125 (F001N XC1944-052)
- 1/4 inch quilting foot with guide SA185 (F057 XC7416-252)
- Screw for the presser foot holder (U.S.A. note: through an authorized dealer) XA4813-051
- Organized accessory tray (U.S.A. note: through an authorized dealer) XC4489-051
Brother NX450 parts questions
Do walking foot SA140 and open toe foot SA186 both ship with the NX-450, and how many feet in all?
Thirteen, counting zigzag foot J on the machine. Beyond the seven lettered feet there are walking SA140, quilting SA129, stitch guide P SA160, adjustable zipper/piping SA161, non stick SA114 and open toe SA186.
Is wide table SA551 (WT5) the NX-450 extension, and is it included?
Wide table SA551 (WT5, XC9567-222), sold separately. Side cutter SA177 and quilting guide SA132 are also optional.
Where does the NX-450 stitch pattern plate attach, and how is it replaced?
It attaches to the handle and shows the stitch numbers and patterns for each stitch mode. No part code is printed; a replacement comes from a dealer or the nearest authorized service center.