Parts and accessories listed for the Brother NX400. Check each product's compatibility before ordering.
- Regular price $18.99Unit price
1/8 Inch Welting Piping Foot, Low Shank, for Singer 221 Featherweight & 201, #40986X618
Regular priceFrom $22.99Unit priceClass 15 Clear Plastic Bobbins (SA156) for Janome, Kenmore & Elna Drop-In Machines, #102261103
Pack Size: 10 Bobbins, 25 Bobbins, 50 Bobbins, 100 Bobbins
Regular priceFrom $19.99Unit priceClass 15 Clear Plastic Bobbins (SA156) for Brother & Baby Lock Sewing Machines, #X52800150
Pack Size: 10 Bobbins, 25 Bobbins, 50 Bobbins, 100 Bobbins
Regular priceFrom $19.99Unit price- Regular price $18.99Unit price
Edge Joining Foot 7mm, Low-Shank Snap-On, for Singer, Janome, Brother & Baby Lock, #P60709
Regular price $27.99Unit priceRotary Hook for Baby Lock, Brother CS6000i, LB6800, NQ900, NV950D, SE400, #XC4141121
Regular price $47.99Unit priceFoot Control Pedal for Brother CS8060, NX450, PC8500, SE270D & Baby Lock BLDC, #XC6651121
Regular price $49.95Unit price- Regular priceFrom $18.99Unit price
Clear View Snap-On Foot for Brother, Baby Lock & bernette, #XC1958-002
Regular price $33.99Unit priceZigzag Needle Plate for Brother NX400, CS8100, SE270D, Baby Lock BLDC, #XC2569051
Regular price $29.99Unit price1/4" Quilting Foot with Guide Bar, Snap-On Metal for Brother & Baby Lock, #P60603
Regular price $26.99Unit priceSequin & Trim Foot, Snap-On, for Baby Lock, Brother & Singer, #P60104
Regular price $31.99Unit price
Parts guide for the Brother NX400
- Presser feet
- Thirteen in the box: A, G, N, I, J (on the machine), R, M, plus walking, quilting, stitch guide P, adjustable zipper/piping, non stick and open toe feet
- Bobbins
- 11.5 mm (7/16 inch) bobbin, SA156 in the U.S.A. (XA5539-151 elsewhere); four in the box
- Needles
- Home sewing machine needles; needle set X58358-051 and twin needle X59296-051. The needle threader takes 75/11 through 100/16; wing needle work calls for a 130/705H 100/16
- Foot controller
- Part XC1154-051; Model N5V in the U.S.A.
- Light
- The light unit is replaced by an authorized dealer if damaged
From the maker's manual, checked Nov 6, 2026
Maker manuals for this machine
What comes with the machine
- Buttonhole foot "A" (XC2691-051)
- Overcasting foot "G" (XC3098-051)
- Monogramming foot "N" (X53840-351)
- Zipper foot "I" (X59370-051)
- Zigzag foot "J" (XC3021-051), on the machine
- Blind stitch foot "R" (X56409-051)
- Button fitting foot "M" (130489-001)
- Walking foot (U.S.A. SA140, others XC2214-002)
- Quilting foot (U.S.A. SA129, others XC1948-002)
- Stitch guide foot "P" (U.S.A. SA160, others XA8839-002)
- Adjustable zipper/piping foot (U.S.A. SA161, others XC1970-002)
- Non stick foot (U.S.A. SA114, others XC1949-002)
- Open toe foot (U.S.A. SA147, others XC1964-002)
- Seam ripper (X54243-001)
- Bobbins x 4 (U.S.A. SA156, others XA5539-151)
- Needle set (X58358-051)
- Twin needle (X59296-051)
- Cleaning brush (X59476-051)
- Eyelet punch (135793-001)
- Screwdrivers, large (X55467-051) and small (X55468-051)
- Spool caps: large (130012-054), medium x 2 (X55260-153), small (130013-154)
- Extra spool pin (XC4654-051)
- Spool net (XA5523-050)
- Foot controller (XC1154-051)
- Grid sheet set (U.S.A. SA527, others XC4549-051)
- Knee lifter (XA6941-052)
- Hard case (XC2360-152)
Optional accessories Brother lists for it
- Side cutter SA177 (XC3879-002)
- Quilting guide SA132 (XC2215-002)
- Wide table SA537 (XC4541-051)
- Organized accessory tray (U.S.A. note: through an authorized dealer) XC4489-051
- Screw of the presser foot holder (U.S.A. note: through an authorized dealer) XA4813-051
Brother NX400 parts questions
What size bobbin fits the NX-400, and what happens with others?
The 11.5 mm (7/16 inch) bobbin, SA156 in the U.S.A. or XA5539-151 elsewhere. Bobbins from older models will not let the machine operate correctly, so use the enclosed bobbin or the same type; four are in the box.
Will the NX-400 threader work with every needle in set X58358-051?
Yes. The threader is rated 75/11 to 100/16, and the box set X58358-051 is two each of 75/11, 90/14 and gold ball point 90/14.
Is a 130/705H 100/16 wing needle right for the NX-400, and at what width?
A 130/705H 100/16 wing needle, with the stitch width kept at 6.0 mm (15/64 inch) or less so the needle does not bend or break.
Which spool cap codes (130012-054, X55260-153, 130013-154) come with the NX-400?
Four: one large 130012-054, two medium X55260-153 and one small 130013-154. The box also has extra spool pin XC4654-051 and spool net XA5523-050.